6.9.1 charge sensor BcSs-PICNIW-2000

Step 1 - connect the sensor charger to AC adapter

Plug the USB-C cable that came with the charger into the AC adapter and plug it into a power outlet.

Step 2 - place the sensor to the charger

Gently place the sensor on the charger as shown in figure below. When positioned correctly, the sensor will power on, and the LED lights will start flashing in green.

Open

Step 3 - wait for full charge signal

Charging verification occurs by watching the green LED light flashing. If this does not occur it is possible that the battery is overheated or improperly placed.