5 equipment installation

The B4C System should be installed by a trained user, as such it is exempt from the checklist for warranty purposes.

5.1 location for operation

When selecting the location for using the B4C System, consider the operating temperature, brightness, power outlets (if a multi parameter monitor that requires the use of a power outlet is used), and the space for movement of professionals and patients.

The system should be used in a climate-controlled location with temperature, humidity and pressure within the environmental specifications given in section 4 technical characteristics | 4.2 environmental

For transportation or storage of equipment, environmental conditions must be maintained within the temperature, humidity and pressure tolerance range defined again in section 4 technical characteristics | 4.2 environmental.

The equipment must be installed and used in an electromagnetic environment in accordance with the information in annex 3 - electromagnetic safety standards. The user must ensure that it is used in such an environment.

Portable and mobile RF communication equipment may affect the product and should therefore be kept at a calculated distance as defined in Table 3-3 in section annex 3 - electromagnetic safety standards.

In coastal cities, attention should be paid to the damage that can be caused by salt spray. It is recommended to install the necessary equipment (air conditioner and dehumidifier) to maintain the ideal conditions for the equipment.

Equipment (especially the sensors) must not be exposed to sunlight.

To facilitate monitoring, the patient should lie or sit still during a monitoring session.

Do not wet equipment nor come into contact with chemicals and / or flammables that could damage it.

5.2 power supply

The BcSs-PICNIW-2000 sensor has one internal battery and is charged via inductive charger. It is not possible to use the product while the battery is being charged.

The BcSs-PICNIW-1000 sensor is powered by two lithium-ion batteries: one internal and another external removable battery. The first, with smaller capacity has enough autonomy to keep the sensor running while the removable battery is being charged, disconnected from the sensor.

5.3 patient environment compatibility

The patient environment is the place where diagnostics, monitoring or treatments occur and as such intentional and unintentional contact can occur between a PATIENT and parts of Electromedical Equipment or Electromedical System, or between a PATIENT and other people in contact with Electromedical Equipment of Electromedical System.

The wireless sensor BcSs-PICNIW-1000, sensor BcSs-PICNIW-2000, its external battery BcAc-BATEX-1000, headbands kit BcAc-AF-1000 and receiver module BcAc-DG-1000 are adequate for use in this environment.

5.4 mobile app installation

The brain4care app can be downloaded and installed from the Google Play Store or Apple App Store through the following steps:

Step 1 - app store

On your mobile device click on the app store for the respective operating system, iOS or Android.

Android (Google)	iOS (Apple)

Android (Google)	iOS (Apple)
Google Play Store	Apple App Store
Open	Open

Step 2 - Search for the app

Click on the search bar and search for the brain4care app.

Step 3 - app selection

Click on the brain4care app that will appear in the list.

Step 4 - installation

On the next screen, click INSTALL or GET.

Step 5 - Open the app

After downloading and installing the app, click OPEN.

Step 6 - GPS permission

For the correct functioning of the B4C System, it is necessary to allow device location access(1).

Step 7 - make sure Bluetooth is active

To use the brain4care system, make sure that Bluetooth (1) is turned on, if not, turn it on in the device settings

Step 8 - corporate access account

To use the brain4care app, you must have a brain4care account. Your corporate account manager must create and enable your user to use the application and system. For details, consult technical support or refer to the Portal Manual.