6.11.1 charge sensor BcSs-PICNIW-2000

back to index | back to charging sensor battery

1 Step 1 - connect the sensor charger to AC adapter
2 Step 2 - place the sensor to the charger
3 Step 3 - wait for full charge signal

ATTENTION - Time to full charge ~ 2 hours | Autonomy ~ 10 hours

Step 1 - connect the sensor charger to AC adapter

Plug the USB-C cable that came with the charger into the AC adapter and plug it into a power outlet.

Step 2 - place the sensor to the charger

Gently place the sensor on the charger as shown in figure below. When positioned correctly, the sensor will power on, and the LED lights will start flashing in green.

ATTENTION - The sensor only charges when it is positioned with the brain4care logo and the button facing upwards.

sensor placement for charging

Step 3 - wait for full charge signal

Charging verification occurs by watching the green LED light flashing. If this does not occur it is possible that the battery is overheated or improperly placed.