6.6.3 pause monitoring session (optional)

1 Pause monitoring session
- 1.1 Step1 - Pause session
- 1.2 Step2 - Paused session screen
2 Pause information in final report

Pause monitoring session

End users have the option to pause a monitoring session to allow for intended or non intended interruptions. This removes unnecessary or undesired monitoring time.

Step1 - Pause session

In the main screen of a monitoring session click “pause monitoring” button to pause a monitoring session.

pause button

Step2 - Paused session screen

When a monitoring session is paused a double line pause symbol will show up in the middle of the screen. To resume, the user need to click on the “resume monitoring” button.

paused monitoring session

Screen item Nr	Name	Description

Screen item Nr	Name	Description
1	Pause symbol	Increased pause symbol to make clear that monitoring session is paused
2	Session time	The monitoring session time counter will stop and blink in grey scale
3	Resume button	The “Pause monitoring” button will be replace by “Resume monitoring session”.

Pause information in final report

A monitoring session pause will be processed and showed in the final report in the following manner.

Pause in the Estimated P2/P1 ratio variation over time

In the main graph of minute by minute estimated P2P1 ratios, the paused section of the monitoring session will be removed and a blue line with a pause symbol will be places between the last processed minute before the pause and the first processed minute after the pause.

Pause in the Monitoring results section

In the minute by minute section of the average processed surrogate ICP waveform and derived parameters the paused section will be shown as a solid blue rectangle with a pause symbol in it.

Any minute fully contained in the pause period will not have waveform shape information nor derived parameters.
Any minute partially contained in the pause will show the exact moment where the pause started and where the pause ended. If enough information in that minute was adequate for parameter derivation, the average pulse waveform and derived parameters will also be shown.

Pause in the Additional Information section

In the additional Information report section all minutes fully contained in the pause will be removed, except for the b4c signal over time graph, and a blue line with a pause symbol will be placed between the last processed minute before the pause, and the first processed minute after the pause.