back to indexThe B4C System is comprised of a sensor (BcSs-PICNIW-1000 or BcSs-PICNIW-2000) that is placed on the patient with a headband that transmits the captured signal to a mobile device that has the brain4care app installed. The mobile application allows the visualization of monitoring reports processed by a connected brain4care analytics. Anchor
Table of Contents | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Info |
---|
ATTENTION - It is recommended to keep the original packaging in case the equipment needs to be transported. Improper use of the product will void warranty. |
3.4.1
SensorBcSs-PICNIW-2000 sensor kit
BcSs-PICNIW-2000
sensor
The BcSs-PICNIW-1000 model but in a lighter format, with 2000 sensor features an intuitive visual interface, ergonomic design, and integrated with the fixation tapeheadband. The sensor module has only one includes a single internal battery and features supports inductive charging with an approximate autonomy of and provides up to 10 hours of continuous monitoring.
BcSs-PICNIW-2000 sensor heaband
BcSs-PICNIW-2000 sensor charger
The charger for the BcSs-PICNIW-2000 sensor is designed for wireless, inductive charging. To charge the sensor, place it on the charger with the logo and button facing upwards, then connect the charger to the AC adapter. When correctly positioned, the sensor light will illuminate, indicating that charging is in progress.
Click here for charger technical specifications.
The BcSs-PICNIW-1000 sensor module monitors intracranial pressure by measuring the cranial volumetric variation. The monitoring process is performed by positioning the sensor in sensor is positioned on the patient’s head, and the information is sent using data is transmitted to other components via Bluetooth wireless technology to the other modules(mobile app and/or dongle). The sensor is powered by a rechargeable external battery , which together , along with the internal battery allows for , provides up to 24 hours of continuous monitoring autonomy.
3.4.2 Headband
BcSs-PICNIW-2000 sensor heabandBcSs-PICNIW
-
PICNIW-1000 sensor headband kit
Version with | Kit | |
---|---|---|
This kit features two adjustable straps , where each has with a snap-on button that enables an initial broad adjustment for of three different sizes. An attached turnbuckle then allows for secondary fine adjustment for a snug fit. Sensor single size headband | Version composed of 8 straps to adjust head circumference sizes, ranging from small to XL. This kit features eight straps of prescribed lengths ranging from XXS to XXL. An attached turnbuckle then allows for secondary fine adjustment for a snug fit. Sensor headband |
Tip |
---|
TIP - For BcSs-PICNIW-1000 most adults will need an M or L headband size. |
. |
BcSs-PICNIW-
20001000 sensor charger
The charger for the BcSs-PICNIW-2000 1000 sensor is a device designed to wirelessly and inductively charge the sensor directly. Place the sensor with the logo and button facing upwards onto the charger and power it using the AC adapter. Upon correct positioning, the sensor light will indicate that the sensor is being charged.
BcSs-PICNIW-1000 sensor charger
The charger for the BcSs-PICNIW-1000 sensor follow the respective design of charging an external battery. It enables the external battery to be charged charge an external battery, enabling continuous sensor use by charging the external battery while the sensor’s internal battery is being used to allow for continuous use of the sensorin operation.
With Equipped with magnetic connectors on the sides, the charger is capable of connecting two other can be linked with two additional chargers, allowing for up to three simultaneous battery chargingbatteries to be charged simultaneously.
3.4.4 Mobile app
The brain4care app can be used on any mobile device compliant with:
Android 7.0 or higher with a minimum of 3 GB of RAM and Bluetooth® 4.2 or 5.0.
iOS 15 or higher with a minimum A12 processor and Bluetooth® 4.2 or 5.0
The mobile App connects to the supplied sensors (BcSs-PICNIW-1000 or BcSs-PICNIW-1000) and optionally also to the BcAc-DG-1000 receiver. It allows for and receiver (optional). It enables real-time visualization of the sensor waveform and cloud-processed waveform information of derived parameters.
Info |
---|
ATTENTION - Use the brain4care mobile app only on tablets or mobile devices that meet the requirements defined in ANNEX 3 and comply with IEC 60601-1. The Bluetooth module of the mobile device must be FCC approved. |
The app can be downloaded and installed from the Google Play Store or Apple App Store. For installation instructions please refer to https://brain4care.atlassian.net/wiki/spaces/B4CSENSORGUIDE30/pages/3220244574/5+equipment+installation#5.0-mobile-app-installation
, including derived parameters.
Android (Google) | iOS (Apple) |
---|---|
|
|
Info |
---|
ATTENTION - It is recommended to keep the original packaging in case the equipment needs to be transported. Improper use of the product will void warrantyMinimum mobile device requirements (ANNEX 3)
|
3.4.5 Receiver (optional)
The BcAc-DG-1000 receiver module (dongle) enables allows the captured waveform reproduction to be displayed on a multiparameter patient monitor. This transmission is done by pairing the sensor, which transmits data via Bluetooth, and the receiver, which transmits the same data by connecting It receives data transmitted wirelessly from the sensor via Bluetooth and then relays this information to the monitor’s invasive pressure input. There are several Different versions of receivers, each with the connector adapted for a monitor model. Please see Appendix 2 for more options.
the receiver are available, each designed to fit specific monitor models. For details on available options, please refer to Annex 2.
For any questions regarding monitor compatibility, contact our technical support team (9 technical support ).