back to index | back to introduction
| Table of Contents | |||
|---|---|---|---|
|
...
3.4.0 System components
The components that comprise a B4C System licence agreement are:
Sensor (model: BcSs-PICNIW-1000 or BcSs-PICNIW-2000);
Receiver (model: BcAc-DG-1000) (optional);
brain4care mobile app, iOS or Android;
Sensor battery charger; (accessory);
Sensor user guide;
3.4.1 System description
A summary of operation of the components that make up the system is shown in Figure 3.4-3.
The sensor (BcSs-PICNIW-1000 or BcSs-PICNIW-2000) is placed on the patient with a headband that transmits the captured signal to the BcAc-DG-1000 receiver module and / or mobile device that has the brain4care app installed. The mobile application allows the visualization of monitoring reports processed in brain4care analytics.
...
|
| Info |
|---|
ATTENTION - It is recommended to keep the original packaging in case the equipment needs to be transported. Improper use of the product will void warranty. |
3.4.1 BcSs-PICNIW-2000 sensor
...
kit
...
BcSs-PICNIW-2000
...
sensor
The BcSs-PICNIW-
...
2000 sensor features an intuitive visual interface, ergonomic design, and integrated
...
headband. The sensor
...
includes a single internal battery and
...
supports inductive charging
...
and provides up to 10 hours of continuous monitoring.
BcSs-PICNIW-2000 sensor heaband
The BcSs-PICNIW-2000 sensor model features an integrated turnbuckle with a strap that offers two adjustments on each side for fine-tuning the fit. Two models are available to accommodate different head sizes: one for smaller heads (42 to 55 cm) and another for larger heads (50 to 63 cm).
BcSs-PICNIW-2000 sensor
...
charger
The charger for the BcSs-PICNIW-2000 sensor is designed for wireless, inductive charging. To charge the sensor, place it on the charger with the logo and button facing upwards, then connect the charger to the AC adapter. When correctly positioned, the sensor light will illuminate, indicating that charging is in progress.
Click here for charger technical specifications.
...
The BcSs-PICNIW-1000 sensor
...
monitors intracranial pressure by measuring
...
cranial volumetric variation. The
...
sensor is positioned on the patient’s head, and the
...
data is transmitted to other components via Bluetooth wireless technology
...
(mobile app and/or dongle). The sensor is powered by a rechargeable external battery , which
...
, along with the internal battery
...
, provides up to 24 hours of continuous monitoring autonomy.
BcSs-PICNIW-1000
...
3.4.4 BcAc-DG-1000 receiver module
The BcAc-DG-1000 receiver module (dongle) enables the captured waveform reproduction on a multiparameter patient monitor. This transmission is done by pairing the sensor, which transmits data via Bluetooth, and the receiver, which transmits the same data by connecting to the monitor’s invasive pressure input. There are several versions of receivers, each with the connector adapted for a monitor model. Please see Appendix 2 for more options.
...
For any questions regarding monitor compatibility, contact our technical support team (9 technical support ).
3.4.5 Headband
The sensor BcSs-PICNIW-2000 features an integrated turnbuckle with a strap with two adjustments on each side for combined with a turnbuckle the fine adjustments. Two models are available to cover small heads (42 to 55 cm) and larger heads (50 to 63 cm).
...
BcSs-PICNIW-2000 Sensor headband
...
sensor
...
headband kit
...
Kit |
|---|
This kit features two adjustable straps |
...
with a snap-on button that enables an initial broad adjustment |
...
of three different sizes. |
...
An attached turnbuckle then allows for secondary fine adjustment for a snug fit.  Sensor single size headband |
Version composed of 8 straps to adjust head circumference sizes, ranging from small to XL.
...
This kit features eight straps of prescribed lengths ranging from XXS to XXL. An attached turnbuckle then allows for secondary fine adjustment for a snug fit.   Sensor headband |
| Tip |
|---|
TIP - For BcSs-PICNIW-1000 most adults will need an M or L headband size. |
3.4.6 Battery charger
...
BcSs-PICNIW-
...
1000 sensor charger
The charger for the BcSs-PICNIW-1000 sensor
...
is designed to charge an external battery
...
, enabling continuous sensor use by charging the external battery
...
while the sensor’s internal battery is
...
in operation.
...
Equipped with magnetic connectors on the sides, the charger
...
can be linked with two additional chargers, allowing for up to three
...
batteries to be charged simultaneously.
...
...
4 Mobile app
The
...
app connects to the sensors and receiver (optional). It enables real-time visualization of the sensor waveform and cloud-processed waveform information, including derived parameters.
Android (Google) | iOS (Apple) |
|---|---|
|
|
 |  |
| Info |
|---|
ATTENTION - Minimum mobile device requirements (ANNEX 3)
|
...
The BcAc-DG-1000 receiver
...
| Info |
|---|
ATTENTION - Use the brain4care mobile app only on tablets or mobile devices that meet the requirements defined in ANNEX 3 and comply with IEC 60601-1. The Bluetooth module of the mobile device must be FCC approved. |
The app can be downloaded and installed from the Google Play Store or Apple App Store. For installation instructions please refer to https://brain4care.atlassian.net/wiki/spaces/B4CSENSORGUIDE29/pages/2853210148/5+equipment+installation#5.0-mobile-app-installation
...
Android (Google)
...
iOS (Apple)
...
Google Play Store
...
Apple App Store
...
module (dongle) allows the captured waveform to be displayed on a multiparameter patient monitor. It receives data transmitted wirelessly from the sensor via Bluetooth and then relays this information to the monitor’s invasive pressure input. Different versions of the receiver are available, each designed to fit specific monitor models. For details on available options, please refer to Annex 2.
For any questions regarding monitor compatibility, contact our technical support team (9 technical support ).
