Table of Contents | ||||
---|---|---|---|---|
|
6.3.1 - opening brain4care app
Open the brain4care app on you mobile device. You will be directed to the APP login screen for Standard Login or the active user selection screen for Trusted Device Login
...
Info |
---|
ATTENTION- Make sure the app is already installed. If not please read section https://brain4care.atlassian.net/wiki/spaces/B4CSENSORGUIDE29/pages/2853210148/5+equipment+installation#5.0-mobile-app-installation |
...
Standard login
Step 1 - username and password
On the home screen, log in using the ID option (1), followed by the username or ID + password(2), and press login (4).
...
Info |
---|
ATTENTION- you should already have a username / ID and password created for you by your clinical engineering team. If not, please reach out to them to be able to use the B4C System. If your user profile is associated to only one corporate account you will be taken directly to the first login screen (Step 5) |
Step 2 - select a corporate account (optional)
If your personal ID is associated to more than one corporate account, OR if your user profile password is different from your corporate account password, a pop-up window will appear with your corporate accounts (1). For those with an open lock icon (2), the supplied password at initial login is the same for that account. A click will take you to the main screen (step 5). For the corporate accounts with a closed lock icon (3), you’ll need to enter the corporate account password as defined in step 4.
...
Step 3 - log into corporate account (optional)
Enter the corporate password(1) and click LOGIN. If the account you want does not appear, contact your clinical engineering team to request access to that account.
...
Trusted device login
Info |
---|
ATTENTION - this login option is available for registered TRUSTED devices. Contact your clinical engineering team to enable this on the device you are using. (Refer them to <link> of this userguide). |
Step 1 - select user profile
Choose your user profile from the list of active users in your corporate account.
...
Step 2 - enter PIN (optional)
Enter your individual PIN. This is only required of your clinical engineering team has defined that individual user PINs are required for the trusted devices.
...
First screen after login
After login a main screen will be shown with three top sections:
...
Icon | Status | Description |
---|---|---|
Report available in the cloud | Indicates that the report is in the cloud. In this case, the mobile device needs to be ONLINE to access the report. | |
Report locally available | Indicates that the report was downloaded on the mobile device, i.e., it is available offline. |
...
6.3.2 - pairing the sensor
Step 1 - turn on the sensor
To turn on the sensor to initiate pairing procedure.
Turn on sensor using power switch, setting it to “I” position. Turning ON sensor BcSs-PICNIW-1000 Make sure you are not trying the press the MODE button. This is used to pair the sensor with a dongle (please see section https://brain4care.atlassian.net/wiki/spaces/B4CSENSORGUIDE29/pages/2853211499#6.8.1-manual-pairing if you are using a dongle)
| Verify if sensor is on via LED indication. If not, long press the on/off button util the LED is on. Turning ON the sensor BcSs-PICNIW-1000
|
Step 2 - start sensor pairing
Click on the connect button (1). The app will scan for any close by sensors that are ON.
...
Step 3 - confirm the sensor
A list of sensors will appear on your sensor pairing pop-up screen (1). The closest sensor will be selected automatically. Verify if the sensor UDI (Unique Device ID) on the sensor, opposite the power buttons, is the same that has been selected from the sensor list in the mobile app.
...