6.2.2.1 Multi-Sized Headbands Kit

Step 1 - measure the cranial circumference

With a measuring tape, measure the largest circumference of the patient's head, that is, the most prominent part at the back of the head (occipital) and just above the eyebrows (supraorbital ridges).

back to top

Step 2 - choose the correct headband stripe

According to the measured head circumference, choose between headband 1 and 2 according to table bellow. If you cannot find the desired size, follow procedure 6.2.4, with the extra tape provided

Code	Size	Head circumference
531020052	Headband stripe 1	16 1/2 - 21 5/8 in
531020053	Headband stripe 2	19 5/8 - 24 3/4 in

TIP - Most adults will need Headband stripe 2

back to top

Step 3 - slide the headband through the sensor latches

Error rendering macro 'excerpt-include' : No link could be created for '6.2.2.2 Individually-Sized Headband Kit'.

back to top

Step 4 - attach the turnbuckle on the headband stripe

Close the headband by snapping the turnbuckle into one end of the strap according to the figure bellow

back to top

Step 5 - adjust rough headband size

Choose which snap-on button to use according to the measured circumference and sizes from table bellow. Pull the end of the band, place the snap-on at the appropriate size, and press onto the desired one until you hear a click.

Size	Head circumference	Snap-on buttons position
Headband 1 (16 1/2 - 21 2/3 in)
P	16 1/2 - 18 1/2 in
M	18 1/8 - 20 1/8 in
G	19 5/8 - 21 5/8 in
Headband 2 (19 5/8 - 24 3/4 in)
P	19 5/8 - 21 5/8 in
M	21 1/4 - 23 1/4 in
G	22 7/8 - 24 3/4 in

TIP - Most adults will need an M and L size while children typically use S or XS size headband.

The final assembly of the headband should resemble the image below

back to top | go to logging into app