Page Comparison

After pairing the sensor, in the application, click “Pair Receiver.” A list of available receivers will appear.

Check the receiver’s UDI on the label opposite to the button…

…and then select it from the list

Some receivers may not be available to be clicked, represented in gray, as they are not active, locked, do not belong to the organization (corporate account), or are awaiting activation (if your sensor is grayed out, check with your clinical engineering team).

After selecting the dongle, the pairing intelligence mode between sensor and receiver will start, with a visual LED confirmation on both devices. Visually confirm the pairing with the physical receiver, with the receiver image in the mobile app. Both should be flashing matching color and blinking patter. Click “Confirm” to continue pairing. If the pattern is not identified or you want to change the receiver, simply click on “Reselect”.

Verify that all three devices have the same flashing pattern and click “Confirm”. If the pattern is not identified or you want to change any of the devices, just click “Reselect”.

The sensor and receiver status LEDs will flash green three times as soon as pairing is confirmed, and a success window will appear in the application.