The B4C System consists of a sensor (BcSs-PICNIW-1000 or BcSs-PICNIW-2000) placed on the patient with a headband. This sensor transmits the captured signal to a mobile device with the brain4care app installed. The mobile application enables the visualization of monitoring reports processed by the connected brain4care analytics system.
| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
3.4.1 BcSs-PICNIW-2000 sensor kit
BcSs-PICNIW-2000 sensor
The BcSs-PICNIW-2000 sensor offers the same applications and functionalities as the BcSs-PICNIW-1000 sensor but in a lighter format. It features an intuitive visual interface, ergonomic design, and integration with the headband. The sensor includes a single internal battery and supports inductive charging, providing approximately 10 hours of continuous monitoring.
BcSs-PICNIW-2000 sensor heaband
The BcSs-PICNIW-2000 sensor model features an integrated turnbuckle with a strap that offers two adjustments on each side for fine-tuning the fit. Two models are available to accommodate different head sizes: one for smaller heads (42 to 55 cm) and another for larger heads (50 to 63 cm).
BcSs-PICNIW-2000 sensor charger
The charger for the BcSs-PICNIW-2000 sensor is designed for wireless, inductive charging. To charge the sensor, place it on the charger with the logo and button facing upwards, then connect the charger to the AC adapter. When correctly positioned, the sensor light will illuminate, indicating that charging is in progress.
The BcSs-PICNIW-1000 sensor monitors intracranial pressure by measuring cranial volumetric variation. The sensor is positioned on the patient’s head, and the data is transmitted to other components via Bluetooth wireless technology (mobile app and/or dongle). The sensor is powered by a rechargeable external battery, which, along with the internal battery, provides up to 24 hours of continuous monitoring autonomy.
BcSs-PICNIW-1000 sensor headband
One Size Fits All Headband | Headband kit |
|---|---|
Adjustable straps, each equipped with a snap button adjustment that allows for three different size settings. This design ensures a secure and customized fit for various head sizes.  Sensor single size headband | The BcSs-PICNIW-1000 sensor model features eight adjustable straps, allowing for precise adjustment to fit head circumferences ranging from small to XL.   Sensor headband |
| Tip |
|---|
TIP - For BcSs-PICNIW-1000 most adults will need an M or L headband size. |
BcSs-PICNIW-1000 sensor charger
The charger for the BcSs-PICNIW-1000 sensor is designed to charge an external battery, enabling continuous sensor use by charging the external battery while the sensor’s internal battery is in operation.
Equipped with magnetic connectors on the sides, the charger can be linked with two additional chargers, allowing for up to three batteries to be charged simultaneously.
3.4.4 Mobile app
The brain4care app is compatible with mobile devices that meet the following requirements:
Android: Version 7.0 or higher, with a minimum of 3 GB of RAM and Bluetooth® 4.2 or 5.0.
iOS: Version 15 or higher, with a minimum A12 processor and Bluetooth® 4.2 or 5.0.
The app connects to the supplied sensors (BcSs-PICNIW-1000 or BcSs-PICNIW-2000) and optionally to the BcAc-DG-1000 receiver. It enables real-time visualization of the sensor waveform and cloud-processed waveform information, including derived parameters.
| Info |
|---|
ATTENTION - Use the brain4care mobile app only on tablets or mobile devices that meet the requirements defined in ANNEX 3 and comply with IEC 60601-1. The Bluetooth module of the mobile device must be FCC approved. |
The app can be downloaded and installed from the Google Play Store or Apple App Store. For installation instructions, please refer to https://brain4care.atlassian.net/wiki/spaces/B4CSENSORGUIDE30/pages/3220244574/5+equipment+installation#5.0-mobile-app-installation
Android (Google) | iOS (Apple) |
|---|---|
|
|
 |  |
| Info |
|---|
ATTENTION - It is recommended to keep the original packaging in case the equipment needs to be transported. Improper use of the product will void warranty. |
3.4.5 Receiver (optional)
The BcAc-DG-1000 receiver module (dongle) allows the captured waveform to be displayed on a multiparameter patient monitor. It receives data transmitted wirelessly from the sensor via Bluetooth and then relays this information to the monitor’s invasive pressure input. Different versions of the receiver are available, each designed to fit specific monitor models. For details on available options, please refer to Appendix 2.
For any questions regarding monitor compatibility, contact our technical support team (9 technical support ).