The B4C System is comprised consists of a sensor (BcSs-PICNIW-1000 or BcSs-PICNIW-2000) that is placed on the patient with a headband that . This sensor transmits the captured signal to a mobile device that has with the brain4care app installed. The mobile application allows enables the visualization of monitoring reports processed by a the connected brain4care analytics system.
Anchor | ||||
---|---|---|---|---|
|
Table of Contents | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
3.4.1 Sensor
BcSs-PICNIW-2000 sensor
The sensor module BcSs-PICNIW-2000 has exactly sensor offers the same applications and functionalities as the BcSs-PICNIW-1000 model sensor but in a lighter format, with . It features an intuitive visual interface, ergonomic design, and integrated integration with the fixation tapeheadband. The sensor module has only one includes a single internal battery and features supports inductive charging with an approximate autonomy of , providing approximately 10 hours of continuous monitoring.
BcSs-PICNIW-1000 sensor
The BcSs-PICNIW-1000 sensor module monitors intracranial pressure by measuring the cranial volumetric variation. The monitoring process is performed by positioning the sensor in the sensor is positioned on the patient’s head, and the information is sent using data is transmitted to other components via Bluetooth wireless technology to the other modules(mobile app and/or dongle). The sensor is powered by a rechargeable external battery, which together , along with the internal battery allows for , provides up to 24 hours of continuous monitoring autonomy.
BcSs-PICNIW-1000 sensor headband
One Size Fits All Headband | Headband kit |
---|---|
Version with two adjustable Adjustable straps, where each has equipped with a snap button adjustment that allows for three different size settings. This design ensures a secure and customized fit for various head sizes. Sensor single size headband | Version composed of 8 straps to adjust head circumference sizes, The BcSs-PICNIW-1000 sensor model features eight adjustable straps, allowing for precise adjustment to fit head circumferences ranging from small to XL. Sensor headband |
Tip |
---|
TIP - For BcSs-PICNIW-1000 most adults will need an M or L headband size. |
3.4.3 Battery charger
BcSs-PICNIW-2000 sensor charger
The charger for the BcSs-PICNIW-2000 sensor is a device designed to wirelessly and inductively designed for wireless, inductive charging. To charge the sensor directly. Place the sensor , place it on the charger with the logo and button facing upwards onto , then connect the charger and power it using to the AC adapter. Upon correct positioningWhen correctly positioned, the sensor light will indicate that the sensor is being chargedilluminate, indicating that charging is in progress.
BcSs-PICNIW-1000 sensor charger
The charger for the BcSs-PICNIW-1000 sensor follow the respective design of charging is designed to charge an external battery. It enables , enabling continuous sensor use by charging the external battery to be charged while the sensor’s internal battery is being used to allow for continuous use of the sensorin operation.
With Equipped with magnetic connectors on the sides, the charger is capable of connecting two other can be linked with two additional chargers, allowing for up to three simultaneous battery chargingbatteries to be charged simultaneously.
3.4.4 Mobile app
The brain4care app can be used on any mobile device compliant withis compatible with mobile devices that meet the following requirements:
Android: Version 7.0 or higher, with a minimum of 3 GB of RAM and Bluetooth® 4.2 or 5.0.
iOS: Version 15 or higher, with a minimum A12 processor and Bluetooth® 4.2 or 5.0.
The mobile App app connects to the supplied sensors (BcSs-PICNIW-1000 or BcSs-PICNIW-10002000) and optionally also to the BcAc-DG-1000 receiver. It allows for enables real-time visualization of the sensor waveform and cloud-processed waveform information of , including derived parameters.
Info |
---|
ATTENTION - Use the brain4care mobile app only on tablets or mobile devices that meet the requirements defined in ANNEX 3 and comply with IEC 60601-1. The Bluetooth module of the mobile device must be FCC approved. |
The app can be downloaded and installed from the Google Play Store or Apple App Store. For installation instructions, please refer to https://brain4care.atlassian.net/wiki/spaces/B4CSENSORGUIDE30/pages/3220244574/5+equipment+installation#5.0-mobile-app-installation
Android (Google) | iOS (Apple) |
---|---|
|
|
Info |
---|
ATTENTION - It is recommended to keep the original packaging in case the equipment needs to be transported. Improper use of the product will void warranty. |
3.4.5 Receiver (optional)
The BcAc-DG-1000 receiver module (dongle) enables allows the captured waveform reproduction to be displayed on a multiparameter patient monitor. This transmission is done by pairing the sensor, which transmits data via Bluetooth, and the receiver, which transmits the same data by connecting It receives data transmitted wirelessly from the sensor via Bluetooth and then relays this information to the monitor’s invasive pressure input. There are several Different versions of receivers, each with the connector adapted for a monitor model. Please see Appendix 2 for more optionsthe receiver are available, each designed to fit specific monitor models. For details on available options, please refer to Appendix 2.
For any questions regarding monitor compatibility, contact our technical support team (9 technical support ).