...
Table of Contents | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
5.1 mobile app installation
The brain4care app can be downloaded and installed from the Google Play Store or Apple App Store through the following steps:
Android (Google) | iOS (Apple) | ||
Step 1 - app store: On your mobile device click on the app store for the respective operating system, iOS or Android. | |||
Step 2 - Search for the app: Click on the search bar and search for the brain4care app. | |||
Step 3 - app selection: Click on the brain4care app that will appear in the list. | |||
Step 4 - installation: On the next screen, click INSTALL or GET. | |||
Step 5 - Open the app: After downloading and installing the app, click OPEN. | |||
| |||
Step 6 - GPS permission: For the correct functioning of the B4C System, it is necessary to allow device location access | |||
Step 7 - make sure Bluetooth is active: To use the brain4care system, make sure that Bluetooth is turned on, if not, turn it on in the device settings | |||
Step 8 - corporate access account: To use the brain4care app, you must have a brain4care account. | |||
Your corporate account manager must create and enable your user to use the application and system. For details, consult technical support or refer to the Portal Manual.
|
...
5.2 location for operation
Info |
---|
ATTENTION - It is recommended to keep the original packaging in case the equipment needs to be transported. Misuse of the product will void the warranty. |
...
Warning |
---|
WARNING - Do not leave the equipment near flammable chemicals such as alcohol, benzene, etc. Should they come in contact with electrical parts, this may result in fire or internal short circuit. The same is true with the use of some flammable disinfectants. |
...
5.
...
3 power supply
The BcSs-PICNIW-2000 sensor has one internal battery and is charged via inductive charger. It is not possible to use the product while the battery is being charged.
...
Warning |
---|
WARNING - If the equipment is not be used for a long period of time, the external battery should be removed. |
...
5.
...
4 patient environment compatibility
The patient environment is the place where diagnostics, monitoring or treatments occur and as such intentional and unintentional contact can occur between a PATIENT and parts of Electromedical Equipment or Electromedical System, or between a PATIENT and other people in contact with Electromedical Equipment of Electromedical System.
The wireless sensor BcSs-PICNIW-1000, sensor BcSs-PICNIW-2000, its external battery BcAc-BATEX-1000, headbands kit BcAc-AF-1000 and receiver module BcAc-DG-1000 are adequate for use in this environment.
5.4 mobile app installation
The brain4care app can be downloaded and installed from the Google Play Store or Apple App Store through the following steps:
...
Android (Google)
...
iOS (Apple)
...
Step 1 - app store: On your mobile device click on the app store for the respective operating system, iOS or Android.
...
Step 2 - Search for the app: Click on the search bar and search for the brain4care app.
...
...
Step 3 - app selection: Click on the brain4care app that will appear in the list.
...
...
Step 4 - installation: On the next screen, click INSTALL or GET.
...
...
Step 5 - Open the app: After downloading and installing the app, click OPEN.
...
...
Note |
---|
CAUTION - Make sure your mobile device is configured with a strong password; do not use it in root mode, nor with unverified apps installed |
...
Step 6 - GPS permission: For the correct functioning of the B4C System, it is necessary to allow device location access
...
Step 7 - make sure Bluetooth is active: To use the brain4care system, make sure that Bluetooth is turned on, if not, turn it on in the device settings
...
Step 8 - corporate access account: To use the brain4care app, you must have a brain4care account.
Your corporate account manager must create and enable your user to use the application and system. For details, consult technical support or refer to the Portal Manual.
...
.