back to index | back to instructions for use
To view the sensor-acquired waveform on your patient monitor, you will need a brain4care BcAc-DG-1000 dongle adapted for invasive pressure inputs on patient monitors.
...
Turn on the sensor and position it on the patient as explained in sections 6.3 loging logging into app and pairing sensor and 6.5 6 positioning sensor and verifying signalon patient
Step 3 - Initiate dongle-sensor pairing
...
In this pairing method, the B4C System mobile app will make the connection between the dongle and the sensor. A major benefit of this method is the ability to view the sensor waveform both on the mobile app and patient monitor and also the ability to generate a monitoring session report (please view section 6.9.7 1 b4c report (original) for details on the generated report)
...
Log into app and pair sensor as explained in section 6.3 loging logging into app and pairing sensor
Step 3 - Initiate dongle pairing in mobile device
...
Remark: If in addition to viewing on the patient monitor you also want to have a generate the report in the mobile application, click on “Start monitoring” and proceed to section 6.6 8 monitoring a the patient . If you just want to monitor on the multiparameter monitor, click “Cancel”.
...