...
| Info |
|---|
ATTENTION - make sure the steps below have been completed: |
...
OPTION A - NEW PATIENT DATA
Step 1 - start session
From the main screen click on new session (1) button to start monitoring session.
| Tip |
|---|
TIP - For login instructions and pairing sensor please read section 6.3 logging into app. |
...
OPTION B - REUSING PATIENT DATA
Step 1 - start session
From the main screen click on the micro menu (X) and choose the Repeat Monitoring option and choose and confirm which data you would like to use. There is an automatic 5s count down for usability
...
Step 2 - fill in patient data (optional)
At the beginning of the monitoring session, an optional step is to fill patient data. This information will be used and recorded in the final report. Fill in all data correctly and click on “start positioning” as shown below.
...
| Tip |
|---|
TIP - if activated for your corporate account you can tag your monitoring session reports. Please refer to 6.6.2 tag monitoring sessions (optional) |
...
Step 3 - verify positioning (optional)
Once satisfied with the pulse morphology displayed on the app’s sensor positioning screen start monitoring button (1).
...