Info |
---|
ATTENTION
|
Warning |
---|
WARNING - Only the original power supply and cables should be used with the charger. If not there is a risk of charger malfunction. Do not insert conductive objects in the magnetic connector. Metallic materials can be attracted by the magnetic connector and cause a short-circuit |
The components used to charge an external battery are identified in Figure 6.9-1. They are:
the external battery
charging dock station
power supply
charging cable
...
Each external battery charger is capable of connecting with two additional chargers through its side magnetic connectors (Figure 6.9-2) on either side, allowing up to three simultaneous charges from a single power source.
...
Table 6.9-1 Charging ranges (nr.1 Figure 6.9-5)
LED lights | % of charge |
---|---|
1 flashing LED | 0 ~ 19% charged |
1 LED on and 1 flashing LED | 20 ~ 39% charged |
2 LEDs on and 1 flashing LED | 40 ~ 59% charged |
3 LEDs on and 1 flashing LED | 60 ~ 79% charged |
4 LEDs on and 1 flashing LED | 80 ~ 99% charged |
5 LEDs on | 100 % charged |
Step 5 - Detach battery from charger
...